Traditional hook high-bay is difficult to replace, red100 screw high-bay, easy to install like a bulb! Easy to replace like a bulb!.
Perfect performance
1. Original design by RED100.the inventor of the middle-hole convection, 30% increase in heat dissipation.
2. With STC, when the temperature is more than 85°,the power will be adjusted smartly.
3. Only 450g, the same products in market is more than 900g.
4. Long neck, suitable for more lighting fixture.
5. With lamp cover, beam angle change from 120°to 90°.
6. Suitable for 4 to 12 meters height large space environment.
2 factors influencing Lux: Lm/watt and Beam angle.
With middle hole convective channel for heat dissipation, the led chips' temperature is 29% lower than normal products, and the Luminous Efficiency increased by 33% (long neck is 120lm/w, normal product is 90lm/w.
Perfect beam angle 120°, large beam angle, large illuminate range, low lux, small beam angle, small illuminate range, high lux.
RED100 designers learned from wind tunnel principle, then the designers creatively use wind tunnel concept into the design of high power LED and develop wind tunnel type middle hole convection heat dissipation technology.
The original mid-hole convection heat dissipation design increases the heat dissipation capacity by 30%, and contributes to a longer service life!
Makes full use of the principal air convection, increases the convection heat dissipation ability so as to enhance the lamp heat dissipation ability by 30%. Red100 is the inventor of the Mid-hole convection heat dissipation in China.